Pre-create podman storage root

Suspected cause of ownership problems when mounting a volume at this
location.

Signed-off-by: Chris Evich <chris_gitlab@icuc.me>

Containerfile

@@ -37,16 +37,16 @@ ARG EXCLUDE_PACKAGES="\
 # Base-image runs as user 'podman', temporarily switch to root
 # for installation/setup.
 USER root
-# Not a real build-arg.  Avoiding addition of an env. layer
-# only to help prevent some extra typing.
-ARG dnfcmd="dnf --setopt=tsflags=nodocs -y"
+# Helper for comparison in future RUN operations (DO NOT USE)
+ARG _DNFCMD="dnf --setopt=tsflags=nodocs -y"
+# Set this instead, if (for example) you want to volume-mount in /var/cache/dnf
+ARG DNFCMD="${_DNFCMD}"
+# Avoid installing any documentation to keep image small
 # During install, excluding packages is meaningless if already installed
 RUN set -x && \
     rm -f /etc/dnf/protected.d/sudo.conf && \
     rm -f /etc/dnf/protected.d/yum.conf && \
-    $dnfcmd remove ${EXCLUDE_PACKAGES} && \
-    dnf clean all && \
-    rm -rf /var/cache/dnf
+    $DNFCMD remove ${EXCLUDE_PACKAGES}
 
 # Enable callers to customize the runner version as needed, otherwise
 # assume this image will be version-tagged, so it's fine to grab the latest.
@@ -56,11 +56,13 @@ ARG TARGETARCH="amd64"
 ENV RUNNER_RPM_URL=https://gitlab-runner-downloads.s3.amazonaws.com/${RUNNER_VERSION}/rpm/gitlab-runner_${TARGETARCH}.rpm
 RUN for rpm in ${EXCLUDE_PACKAGES}; do x+="--exclude=$rpm "; done && \
     set -x && \
-    $dnfcmd update && \
-    $dnfcmd install $x $RUNNER_RPM_URL && \
-    $dnfcmd upgrade && \
-    dnf clean all && \
-    rm -rf /var/cache/dnf
+    $DNFCMD update && \
+    $DNFCMD install $x $RUNNER_RPM_URL && \
+    $DNFCMD upgrade && \
+    if [[ "${DNFCMD}" == "${_DNFCMD}" ]]; then \
+      dnf clean all && \
+      rm -rf /var/cache/dnf; \
+    fi
 
 # In case of a runner escape, prevent easy installation of packages.
 RUN rm -f /etc/dnf/protected.d/* && \
@@ -96,7 +98,7 @@ RUN sed -i -r \
     chmod +x /usr/local/bin/podman-in-podman-maintenance && \
     chown -R podman.podman /home/podman && \
     rm -f /home/podman/.bash* && \
-    echo DOCKER_HOST="unix:///tmp/podman-run-1000/podman/podman.sock" > /etc/profile.d/podman.sh
+    echo DOCKER_HOST="unix:///tmp/podman-run-1000/podman/podman.sock" > /etc/profile.d/podman.sh && \
 
 # Runtime rootless-mode configuration
 USER podman
@@ -105,6 +107,9 @@ VOLUME ["/home/podman/.local/share/containers/storage/",\
 WORKDIR /home/podman
 ENTRYPOINT ["/usr/local/bin/gitlab-runner-wrapper"]
 
+# Ensure root storage directory exists with correct permissions
+RUN mkdir -p .local/share/containers/storage
+
 # Gitlab-runner configuration options.  Default to unprivileged (nested)
 # runner.  Privileged is required to permit nested container image building.
 ARG RUNNER_NAME="qontainers-pipglr"
@@ -132,16 +137,10 @@ ENV REGISTER_NON_INTERACTIVE="true" \
     DOCKER_PRIVILEGED="$PRIVILEGED_RUNNER"
 
 # Not a real build-arg.  Simply here to save lots of typing.
-ARG _pm="--systemd=true --device=/dev/fuse --security-opt label=disable --user podman -v gitlab-runner-storage:/home/podman/.local/share/containers/storage:Z,U -v gitlab-runner-cache:/home/podman/.cache/gitlab-runner:Z,U -v gitlab-runner-config:/home/podman/.gitlab-runner:Z,U -e PODMAN_RUNNER_DEBUG"
+ARG _pm="--systemd=true --device=/dev/fuse --security-opt label=disable --user podman --volume pipglr-podman-root:/home/podman/.local/share/containers/storage:Z --volume pipglr-runner-config:/home/podman/.gitlab-runner:Z -e PODMAN_RUNNER_DEBUG -e LOG_LEVEL"
 
 # These labels simply make it easier to register and execute the runner.
 # Define them last so they are absent should a image-build failure occur.
 LABEL register="podman run -it --rm $_pm --secret REGISTRATION_TOKEN,type=env \$IMAGE register"
-
-# TODO: Figure out what's needed to run w/o --privileged.  When unspecified,
-# conmon fails with this error (from podman debug output):
-#
-# DEBU[0019] running conmon: /usr/bin/conmon args="[--api-version 1 -c 289...c08 -u 289...c08 -r /usr/bin/crun -b /home/podman/.local/share/containers/storage/overlay-containers/289...c08/userdata -p /tmp/podman-run-1000/containers/overlay-containers/289...c08/userdata/pidfile -n runner-8pxm3xb-project-19009784-concurrent-0-a71b53d132a29e56-predefined-0 --exit-dir /tmp/podman-run-1000/libpod/tmp/exits --full-attach -l k8s-file:/home/podman/.local/share/containers/storage/overlay-containers/289...c08/userdata/ctr.log --log-level debug --syslog --runtime-arg --cgroup-manager --runtime-arg disabled -i --conmon-pidfile /tmp/podman-run-1000/containers/overlay-containers/289...c08/userdata/conmon.pid --exit-command /usr/bin/podman --exit-command-arg --root --exit-command-arg /home/podman/.local/share/containers/storage --exit-command-arg --runroot --exit-command-arg /tmp/podman-run-1000/containers --exit-command-arg --log-level --exit-command-arg debug --exit-command-arg --cgroup-manager --exit-command-arg cgroupfs --exit-command-arg --tmpdir --exit-command-arg /tmp/podman-run-1000/libpod/tmp --exit-command-arg --network-config-dir --exit-command-arg  --exit-command-arg --network-backend --exit-command-arg netavark --exit-command-arg --volumepath --exit-command-arg /home/podman/.local/share/containers/storage/volumes --exit-command-arg --runtime --exit-command-arg crun --exit-command-arg --storage-driver --exit-command-arg overlay --exit-command-arg --events-backend --exit-command-arg file --exit-command-arg --syslog --exit-command-arg container --exit-command-arg cleanup --exit-command-arg 289...c08]"
-# [conmon:d]: failed to write to /proc/self/oom_score_adj: Permission denied
-
-LABEL run="podman run -d --privileged --name gitlab-runner $_pm \$IMAGE run"
+# Note: Privileged mode is required to permit building container images with inner-podman
+LABEL run="podman run -d --rm --privileged --name gitlab-runner $_pm \$IMAGE run"

README.md

@@ -12,70 +12,101 @@ made available as:
 It's purpose is to provide an easy method to execute a GitLab runner,
 to service CI/CD jobs for groups and/or repositories on
 [gitlab.com](https://gitlab.com).  It comes pre-configured to utilize
-the gitlab-runner app to execute with rootless podman containers,
+the gitlab-runner app to execute within a rootless podman container,
 nested inside a rootless podman container.
 
-This is intended to provide multiple additional layers of security
-for the host, when running potentially arbitrary CI/CD code.  Though,
-the ultimate responsibility still rests with the end-user to review
-the setup and configuration relative to their own situation/environment.
+This is intended to provide additional layers of security for the host,
+when running potentially arbitrary CI/CD code.  Though, the ultimate
+responsibility still rests with the end-user to review the setup and
+configuration relative to their own security situation/environment.
 
-### Quickstart
+### Operation
 
-Several labels are set on the built image or manifest list to support
-easy registration and execution of a runner container.  They require
-defining several environment variables for use.
+This image supports `podman container runlabel`, or if your version
+lacks this feature, Several labels are set on the image to support
+easy registration and execution of a runner container using a special
+bash command.  See the examples below for more information.
+
+#### Volume Ownership Bug
+
+Some versions of podman contain a bug where named volumes aren't owned
+by the namespaced user within a rootless container (i.e. in conjunction
+with the --user option).  Since the `podman` user/group inside the `pipglr`
+container is known, it's possible to manually set/reset ownership:
+
+```bash
+VOLUME=pipglr-podman-root
+podman volume create $VOLUME
+cd $(podman unshare podman volume mount $VOLUME)
+podman unshare chown 1000:1000
+podman volume unmount $VOLUME
+```
 
 #### Runner registration
 
 Each time the registration command is run, a new runner is added into
-the configuration.  If your intent is to simply update or modify the
-configuration, please edit the config.toml file within the
-`gitlab-runner-config` volume.
-
-Note: These commands assume you have both `podman` and `jq` available.
-Instead of `eval`, if your podman version supports `container runlabel`,
-you may use that.
+the configuration.  If however, you simply need to update/modify the
+configuration, please edit the `config.toml` file directly after mounting
+(default) `pipglr-runner-config` (`/home/podman/.gitlab-runner/`) volume.
+For modern versions of podman, registration can be performed with the
+following commands:
 
 ```bash
-$ echo '<registration token>' | podman secret create REGISTRATION_TOKEN -
-$ export IMAGE=<image FQIN:TAG>
-$ eval $(podman inspect --format=json $IMAGE | jq -r .[].Labels.register)
+IMAGE="=registry.gitlab.com/qontainers/pipglr:latest"
+echo '<actual registration token>' | podman secret create REGISTRATION_TOKEN -
+podman container runlabel $IMAGE register --secret REGISTRATION_TOKEN,type=env
+```
+
+Where `<actual registration token>` is the value obtained from the "runners"
+settings page of a gitlab group or project.
+
+Note: Some versions of podman don't support the `container runlabel` sub-command.
+If this is the case, you may simulate it with the following command (in addition
+to the other example commands above):
+
+```bash
+eval $(podman inspect --format=json $IMAGE | jq -r .[].Labels.register)
 ```
 
 #### Runner Startup
 
-With one or more runners registered and configured, and `$IMAGE` set,
-the GitLab runner container may be launched with the following commands.
+With one or more runners successfully registered and configured, the GitLab
+runner container may be launched with the following commands:
 
-Note: The first time this is run, startup will take an extended amount
-of time as the runner downloads and runs several (inner) support containers.
-As above, instead of `eval`, if your podman version supports `container runlabel`,
-you may use that.
+```bash
+podman container runlabel $IMAGE run
+```
 
-Debugging: You may `export PODMAN_RUNNER_DEBUG=debug` to enable inner-podman
-debugging (or any other supported log level) to stdout.
+As above, if you're missing the `container runlabel` sub-command, the following
+may be used instead (assuming `$IMAGE` remains set):
 
 ```bash
 $ eval $(podman inspect --format=json $IMAGE | jq -r .[].Labels.run)
 ```
 
+#### Debugging
+
+Before starting the runner, you may `export PODMAN_RUNNER_DEBUG=debug` to enable
+debugging on the inner-podman.  Whereas `export LOG_LEVEL=debug` can be used to
+debug the gitlab-runner itself.
+
 ## Building
 
 This image may be built simply with:
 
-`podman build -t runner .`
+`podman build -t registry.gitlab.com/qontainers/pipglr:latest .`
 
 This will utilize the latest stable version of podman and the latest
 stable version of the gitlab runner.
 
-### Multi-arch
+### Notes
 
-Assuming the host supports foreign-architecture emulation.  The
-`Containerfile` may be used to produce a multi-arch manifest-list.
-For example:
+* If you wish to use the `testing` or `upstream` flavors of the podman base image,
+  simply build with `--build-arg FLAVOR=testing` (or `upstream`).
 
-`podman build --jobs 4 --platform linux/s390x,linux/ppc64le,linux/amd64 --manifest runner .`
+* Additionally or alternatively, you may specify a specific podman base image tag
+  with `--build-arg BASE_TAG=<value>`.  Where `<value>` is either `latest`, the
+  podman image version (e.g. `v4`, `v4.2`, `v4.2.0`, etc.)
 
 ### Build-args
 
@@ -90,13 +121,18 @@ Several build arguments are available to control the output image:
   and `vX.Y.Z` (where, `X`, `Y`, and `Z` represent the podman semantic
   version numbers).  It's also possible to specify an image SHA.
 * `EXCLUDE_PACKAGES` - A space-separated list of RPM packages to prevent
-  their existance in the final image.  This is intended as a security measure
+  their existence in the final image.  This is intended as a security measure
   to limit the attack-surface should a gitlab-runner process escape it's
   inner-container.
 * `RUNNER_VERSION` - Allows specifying an exact gitlab runner version.
   By default the `latest` is used, assuming the user is building a tagged
   image anyway.  Valid versions may be found on the [runner
   release page](https://gitlab.com/gitlab-org/gitlab-runner/-/releases).
+* `DNFCMD` - By default this is set to `dnf --setopt=tsflags=nodocs -y`.
+  However, if you'd like to volume-mount in `/var/cache/dnf` then you'll
+  need to use
+  `--build-arg DNFCMD="dnf --setopt=tsflags=nodocs -y --setopt keepcache=true`"
+  Note: Changing `DNFCMD` will cause build-time cache cleanup to be disabled.
 * `TARGETARCH` - Supports inclusion of non-x86_64 gitlab runners.  This
    value is assumed to match the image's architecture.  If using the
    `--platform` build argument, it will be set automatically.
@@ -113,3 +149,16 @@ Several build arguments are available to control the output image:
   configuration), and determines where jobs are run.
 * `RUNNER_UNTAGED` - Defaults to `true`, may be set to `false`.  Allows
   the runner to service jobs without any tags on them at all.
+
+### Environment variables
+
+Nearly every option to every gitlab-runner sub-command may be specified via
+environment variable.  Many important/required options are set in the
+`Containerfile`.  However it's entirely possible to pass them in via
+either of the `podman container runlabel...` container commands.  To
+discover them, simply append `--help` to the end of the command.
+For example:
+
+```bash
+podman container runlabel $IMAGE register --help
+```

gitlab-runner-wrapper

@@ -11,11 +11,18 @@ if [[ -n "$PODMAN_RUNNER_DEBUG" ]]; then
     _debug_args="--log-level=$PODMAN_RUNNER_DEBUG"
 fi
 
-if [[ "$1" == "run" ]] && [[ ! -S "/tmp/podman-run-1000/podman/podman.sock" ]]; then
+SOCKET="/tmp/podman-run-1000/podman/podman.sock"
+if [[ "$1" == "run" ]] && [[ ! -S "$SOCKET" ]]; then
     podman $_debug_args system service -t 0 &
     /usr/local/bin/podman-in-podman-maintenance &
     # Prevent SIGHUP propagation to podman process
     disown -ar
+    sleep 1s  # Give podman a chance to get going
+    # Verify podman is listening on it's socket
+    if [[ ! -S "$SOCKET" ]]; then
+        echo "ERROR: Inner-podman system service failed to start, expecting to find socket '$SOCKET'. Are all volume's owned & writeable by $(id -u podman):$(id -g podman)?" > /dev/stderr
+        exit 1
+    fi
 fi
 
 exec gitlab-runner "$@"